The new upgrade version YN622N II can set to "622" or "603-RX" communication mode through the power switch, supports receiving the trigger signal of the YN560- TX/RF605(603 mode)/RF603(II) series products, with multi aspects improved, equipped with quick lock design and supports USB firmware upgrade.
YN622NII i-TTL wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users. Different photographic effects can be realized through setting the flash at 360 degrees. It supports i-TTL and manual flash, frontcurtain sync, rear- curtain sync and high-speed sync(Auto FP), the highest sync speed is 1/8000s. it can remote change flash exposure compensation or flash output of each group, supports different flash mode mix using. Supports the transmitter installed i-TTL flash, in addition, it supports the master unit on transmitter sets the parameters of each group. This product is a wireless transceiver design, the distance of remote control reaches 100M, supporting 7 wireless channels and A/B/C three groups and with AF assist beam emitter function.
YN622N 2 transceivers kit consist two similar transceivers, support one camera controlling multiple flashes at the same time. Install the flashes with the receiver additionally purchased to make them into an application form of multiple-flashes, number of the receivers is not limited.
Yongnuo YN-622N II Features
Quick lock design
Supports USB firmware upgrade
Supports "622" communication mode and "603-RX" communication mode
Compatible flash mode: i-TTL, Manual flash
Compatible Shutter sync: front-curtain sync, rearcurtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s
Support remote set the parameters of flash through the transceiver (Remote Control Mode)
Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode)
Support the flash installed on transmitter(on-top flash)and supports i-TTL function
Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode)
Support FEC, FVL, BKT function
Support modeling flash and red-eye reduction flash
Support flash zooming (auto)
Built-in AF assist beam emitter (AF Lamp)
Settings saved automatically
Compatible with Yongnuo/ Nikon series flashes
Support PC port triggering strobe flashes
PC port support front/rear curtain sync and highspeed sync(Super Sync)function
Support single-contact of camera & flash triggering (max sync speed is 1/250s)